Description

0438108 Wiring Loom Repair Kit

The 0438108 wiring loom repair kit provides 50 metres of 1.0mm² black automotive cable on a single coil — giving workshops and fleet maintenance teams a comprehensive supply of correct-specification repair cable for automotive and commercial vehicle wiring loom restoration. Damaged, corroded, or rodent-chewed wiring loom is one of the most common causes of persistent electrical faults across commercial vehicles, and correct cable specification is essential for a repair that lasts. At £159.99, the genuine Carpoint 0438108 delivers the right cable in the right quantity for professional loom repair work.

What Is the 0438108 Wiring Loom Repair Kit?

The Role of Correct Cable Specification in Loom Repair

Using the correct cable cross-section is fundamental to any reliable wiring loom repair. Specifically, 1.0mm² automotive cable carries the current ratings typical of lighting, sensor, and signal circuits across commercial vehicles — circuits that form the majority of loom repair work in a professional workshop environment. Fitting undersized cable into a repair section overheats under load, degrades insulation, and produces a repeat fault within a short service period. Consequently, using correctly rated 1.0mm² cable from the outset eliminates this risk entirely.

Why 50 Metres on a Single Coil Matters

The 0438108 supplies 50 metres of cable on a single coil — a practical quantity that covers multiple repair jobs without requiring repeated reordering. Because loom repairs on commercial vehicles often involve multiple damaged sections across the same vehicle, having a full coil available eliminates the frustration of running short mid-repair. Furthermore, workshop environments benefit from bulk cable supply that reduces per-metre cost compared with purchasing shorter lengths for individual jobs.

0438108 Wiring Loom Repair Kit — Full Specifications

0438108 Wiring Loom Repair Kit — Compatibility

Universal Application Across Automotive and Commercial Vehicles

The 0438108 wiring loom repair kit supplies standard 1.0mm² automotive cable suitable for use across a wide range of vehicle makes, models, and electrical system types. Because automotive wiring repair cable is specified by cross-section and current rating rather than vehicle-specific connector type, the 0438108 suits repair work on cars, vans, light commercial vehicles, and trucks wherever 1.0mm² cable is the correct specification for the circuit being repaired.

Always confirm the correct cable cross-section for the specific circuit being repaired before cutting — using 1.0mm² cable on circuits requiring a larger cross-section risks overheating and insulation failure under sustained load.

0438108 Cross-Reference

0438108 Wiring Loom Repair Kit — When and Why to Use

Signs the Vehicle Wiring Loom Requires Repair

Watch for these indicators during electrical fault diagnosis or routine vehicle inspection:

Intermittent electrical faults — lighting, sensors, or ancillary equipment that cut in and out without a consistent pattern almost always indicate damaged or corroded wiring within the loom rather than component failure. Specifically, a repair section using correctly rated 1.0mm² cable restores circuit integrity and eliminates the intermittent fault permanently.

Visible loom damage — cracked, melted, or rodent-damaged cable insulation requires immediate repair before further electrical faults develop. Because damaged insulation exposes the conductor to short circuit risk against surrounding metal or other cables, prompt loom repair using the 0438108 cable prevents secondary electrical damage across the affected circuit.

Corrosion at splice points — green or white corrosion deposits at existing loom splice points indicate moisture ingress into the repair section. Cutting out the corroded section and replacing it with fresh 1.0mm² cable from the 0438108 kit restores full conductivity and prevents the fault from progressing further along the loom.

Fix Automotive Wiring Faults — Use Correct Cable Specification Every Time

Professional automotive wiring loom repair requires correct cable specification — matching the original conductor cross-section of the damaged section rather than substituting whatever cable is available. According to Bosch Automotive wiring and electrical systems guidance, using correct cable cross-section in loom repairs is fundamental to circuit protection, correct fuse operation, and prevention of heat damage in repaired sections. Furthermore, UK vehicle construction and use regulations require that vehicle electrical systems are maintained in a safe and serviceable condition — making correct specification loom repair a compliance requirement, not just a best practice.

Why Choose the 0438108 Wiring Loom Repair Kit?

Correct 1.0mm² Specification — Seven-Conductor Construction

The 0438108 supplies 1.0mm² cable with a seven-conductor construction — the standard configuration for automotive signal and lighting circuit repair work. As a result, the cable delivers the correct current rating, flexibility for routing through loom conduit and bulkhead grommets, and the insulation integrity required for long-term reliable performance in automotive environments.

50 Metres — Professional Workshop Quantity

Furthermore, 50 metres on a single coil provides sufficient cable for multiple vehicle loom repair jobs without requiring mid-job reordering. For workshops handling regular loom repair work across commercial vehicle fleets, the 0438108 delivers a cost-effective bulk supply that reduces per-repair material cost compared with purchasing individual cable lengths.

Black — Standard Automotive Loom Colour

Additionally, the black cable colour matches the standard automotive loom convention for earth, ground, and general circuit wiring — the most commonly repaired cable type across vehicle electrical systems. Consequently, repairs using the 0438108 integrate cleanly with existing loom sections without creating colour inconsistencies that complicate future fault diagnosis.

Buy 0438108 Wiring Loom Repair Kit Online

Add to basket for same-day dispatch on orders placed before our daily cut-off. Fast UK and EU delivery available at checkout. Contact our parts team for trade pricing, bulk orders, or technical queries before purchasing.

FAQs —

What does 1.0mm² (x7) mean on this cable? The 1.0mm² refers to the total conductor cross-section area, and x7 indicates the cable consists of seven individual strands twisted together to form that cross-section. Seven-strand construction gives the cable the flexibility required for routing through automotive loom conduit and around tight bends without conductor fatigue.

Is 1.0mm² suitable for all vehicle circuit repairs? 1.0mm² cable is correct for lighting, signal, and sensor circuits typically rated up to 8–10 amps. For higher-current circuits — such as main power feeds, starter circuits, or high-current ancillary equipment — a larger cable cross-section is required. Always confirm the original cable specification before selecting replacement cable.

Can I use this cable for commercial vehicle loom repairs? Yes — 1.0mm² automotive cable is suitable for signal, lighting, and sensor circuit repairs across commercial vehicles wherever the original loom uses 1.0mm² conductors. Always verify the correct cross-section against the circuit being repaired before cutting.

How many repair jobs will 50 metres cover? This depends entirely on the length of cable required per repair section. As a guide, a typical single-circuit loom repair on a commercial vehicle uses between 0.5 and 3 metres of cable — meaning 50 metres provides capacity for a substantial number of individual repair jobs.

Complete the Vehicle Wiring Repair

• Heat Shrink Solder Connectors — use waterproof solder connectors for all loom splice joints to prevent future moisture ingress
• Cable Ties and Loom Tape — re-loom repaired sections correctly to prevent chafing and movement damage
• Electrical Contact Cleaner — clean all connector pins and terminals before reassembly to ensure full conductivity across repaired circuits

Price: £159.99 | Genuine Carpoint | 1.0mm² | 50m | Black | Coil | New | In Stock | Ships Today