Description
Headlight Cable Repair Set STUALARM 902H1 H1 H3 Silicone Ships Today
Buy this headlight cable repair set for H1 or H3 bulb connections. The STUALARM 902H1 features 200mm silicone cable with ceramic plug. Works on 12-24V systems. Ships Today.
The STUALARM 902H1 is a headlight cable repair set for H1 and H3 bulb types. Unlike replacing the entire wiring harness, this repair set replaces only the damaged plug and cable section. The ceramic construction withstands high heat from halogen bulbs. Silicone insulation remains flexible in engine bay temperatures.
When to Use This Headlight Cable Repair Set
Melted or Brittle Headlight Connectors
H1 and H3 bulbs run hot. Over time, standard plastic plugs become brittle and crack. This ceramic repair set solves that problem for your headlight.
Corroded Terminals in Your Headlight
Moisture ingress causes terminal corrosion. Poor connection leads to intermittent headlight operation. This replacement plug restores reliable contact.
Vibration from commercial vehicles causes wire fatigue near connectors. The 200mm silicone cable gives you fresh wire to splice into your existing harness.
Technical Specifications for headlight cable repair set
| Specification | Detail |
|---|---|
| Item number | 902H1 |
| Manufacturer | STUALARM |
| Condition | New |
| EAN | 8595128232744 |
| Cable insulation | Silicone |
| Plug type | H1 / H3 compatible |
| Cable length | 200mm |
| Material | Ceramic (plug body) |
| Voltage | 12-24V |
| Quantity | 1 |
Why ceramic matters for your headlight: H1 and H3 halogen bulbs reach 300-400°C. Plastic plugs melt over time. This ceramic plug withstands extreme headlight heat without degradation.
Fitment Guide
This repair set fits:
Any headlight using H1 bulbs (high beam, auxiliary)
Any headlight using H3 bulbs (fog lights, some low beams)
12V commercial vehicles (trucks, vans)
24V commercial vehicles (trucks, buses)
Important note: Works on both 12V and 24V systems. Confirm your bulb type is H1 or H3 before purchasing this repair set. good too for FORD F-Max Parts, headlight
For headlight wiring specifications, refer to Bosch automotive electrical documentation.
Installation Guide for headlight cable repair set
Difficulty level: Easy – basic electrical knowledge required
Tools needed:
Wire cutters
Wire strippers
Crimp tool or soldering iron
Heat shrink tubing (recommended)
Step-by-step installation:
Disconnect battery from your vehicle
Cut off the damaged headlight plug
Strip 5-10mm of insulation from existing wires
Strip same amount from new STUALARM 902H1 wires
Connect using crimp connectors or solder
Cover connections with heat shrink tubing
Push new ceramic plug onto H1 or H3 bulb
Reconnect battery and test headlight
Time estimate: 10-15 minutes per repair
According to HELLA electrical repair guidelines, silicone insulation and ceramic plugs are recommended for high-temperature headlight applications.
Frequently Asked Questions headlight cable repair set
Q: Will this fit my H1 or H3 bulb?
Yes. The STUALARM 902H1 is designed for both H1 and H3 plug types.
Q: Is this for 12V or 24V vehicles?
Works on both. The repair set handles 12V and 24V systems.
Q: Why ceramic instead of plastic?
Ceramic withstands extreme heat from H1/H3 bulbs. Plastic plugs melt over time.
Q: How long is the cable?
200mm (20cm) of silicone-insulated wire.
Q: Does this come as a single or pair?
Quantity is 1. Order two if repairing both headlights.
Q: What is the warranty?
STUALARM typically provides 12 months warranty.
Q: Does this ship today?
Yes. Orders before 2pm GMT ship same day.
Order Summary
Buy the headlight cable repair set STUALARM 902H1 – £2.59
Ceramic plug for H1/H3 bulbs
200mm silicone cable
Works on 12V and 24V systems
Ships Today – order before 2pm GMT
