Description
2PF 959 590-202 Position Light for Trucks
The 2PF 959 590-202 Position Light for Trucks is Hella’s ECE and ADR-approved single-LED marker lamp — built for commercial vehicles operating on 12V or 24V systems across the UK and EU. At [client to add price], it ships with a 500mm cable, crystal clear lens, and carries full ECE type approval alongside ADR/GGVS certification for hazardous goods vehicles. If your cab or body position marker is dark, cracked or failing inspection — this is the correct replacement.
ADR approval sets this unit apart from standard marker lamps. Trucks carrying dangerous goods operate under stricter lighting compliance requirements — and only an ADR/GGVS-certified position lamp meets that threshold. The Hella E24 0054 position lamp covers both standard haulage and hazardous goods applications in a single part number.
What Is the 2PF 959 590-202 Position Light for Trucks?
The Hella 2PF 959 590-202 is a single-LED, single-function position light engineered for 12V and 24V commercial vehicles. It delivers the static white marker illumination required under ECE regulations for trucks on public roads — with the additional ADR/GGVS certification required for vehicles transporting hazardous materials. The crystal clear lens provides unfiltered LED light output with no colour distortion across its operating temperature range of -40°C to +60°C.
How the Position Light Works
Current enters through the 500mm pre-wired cable from the vehicle’s position light circuit. The single LED activates immediately on circuit energisation — no warm-up, no flicker, no output variation across the -40°C to +60°C operating range. That temperature envelope is significant. At -40°C, a filament lamp struggles to reach full output. This Hella 2PF 959 590-202 LED cab light delivers full illumination from the first millisecond regardless of ambient temperature. The fitting-mount design anchors the unit directly to the body or cab surface for a secure, vibration-resistant installation.
Why Truck Position Lights Fail
Physical impact cracks lenses and distorts housings — position lights on cab corners and body edges are exposed to overhead obstructions, loading bay structures and low branches. UV degradation hazes crystal clear lenses over time, scattering LED output below effective visibility thresholds. Water ingress through a compromised seal corrodes the internal LED connections — the unit looks intact externally until it simply stops illuminating. On ADR-rated vehicles, a single non-compliant lamp can ground the vehicle pending rectification.
2PF 959 590-202 Position Light for Trucks — Full Specifications
| Specification | Detail |
|---|---|
| Part Number | 2PF 959 590-202 |
| Use Number | E24 0054 |
| Manufacturer | Hella |
| Light Design | LED |
| Lamp Type | LED |
| Number of LEDs | 1 |
| Number of Light Functions | 1 |
| Voltage | 12V – 24V |
| Light Function | Position light (LED) |
| Lens Colour | Crystal clear |
| Cable Length | 500mm |
| Mounting Type | Fitting |
| Registration Type | ECE approved, ADR / GGVS approved |
| Temperature Range | -40°C to +60°C |
| Condition | New |
| EAN | 4082300305234 |
⚠️ Professional Fitting Note: This unit requires assembly and disassembly by qualified personnel. Installation must be carried out by a competent auto-electrician or qualified workshop technician.
2PF 959 590-202 Position Light for Trucks — Compatibility
The Hella 2PF 959 590-202 marker lamp operates across the full 12V–24V range — covering light commercials through to fully laden 44-tonne tractor units and ADR-regulated hazardous goods vehicles. Dual-voltage operation means one part number covers your entire mixed fleet without voltage-matching risk.
Confirming Fitment
Confirm your mounting surface accommodates the fitting-mount design before ordering. The 500mm cable is suited to standard cab and body mounting positions — measure your routing distance from mount to loom connection and confirm it reaches your specific installation point. For ADR/GGVS applications, verify that the replacement unit’s certification reference matches the approval documentation required for your vehicle’s dangerous goods licence.
Cross-Reference Table
| Reference Type | Number |
|---|---|
| Hella Part Number | 2PF 959 590-202 |
| Use Number | E24 0054 |
| EAN | 4082300305234 |
| Registration | ECE approved, ADR / GGVS approved |
When and Why to Replace
2PF 959 590-202 Symptoms — What to Watch For
Position lamp completely dark. The position light circuit energises — surrounding markers illuminate — but this mounting position is dead. That’s terminal corrosion inside a water-ingressed housing or a failed LED. The Hella 2PF truck marker unit is the direct replacement. On an ADR vehicle, a single failed position lamp is a compliance breach — not a deferred maintenance item.
Cracked or hazed crystal clear lens. Physical impact or UV degradation compromises lens integrity. A cracked lens admits water to the LED assembly. A hazed lens scatters light output below the ECE-required visibility threshold. Either condition fails a DVSA inspection — and neither self-resolves.
Intermittent illumination on the position light circuit. The lamp works on some journeys and not others — worse in cold or wet conditions. A partially corroded internal connection making intermittent contact. At -40°C operating rating, this unit should perform consistently in any UK or EU operating environment. Intermittent output means the housing seal has failed. Replace it.
Fix Truck Position Light Fault — Fit the 2PF 959 590-202
No repair path exists for a corroded LED housing or compromised lens. The Hella E24 0054 position lamp replaces the complete unit — ECE and ADR certified, pre-wired at 500mm, ready to fit by a qualified technician. Connect, secure, test. Compliance restored.
Why Choose the 2PF 959 590-202 Position Light for Trucks?
ECE and ADR/GGVS Approved — Covers Hazardous Goods Vehicles
Most position lamps carry ECE approval. Far fewer carry ADR/GGVS certification. The 2PF 959 590-202 crystal clear position light holds both — making it the correct specification for vehicles operating under ADR dangerous goods regulations where lighting compliance is subject to additional enforcement scrutiny. According to Hella’s official product documentation, this unit meets the relevant ECE type approval standards for position lighting on commercial vehicles across EU member states and the UK.
-40°C to +60°C Operating Range — Reliable in All Conditions
Standard position lamps have narrower temperature tolerances. This Hella 2PF 959 590-202 LED cab light operates from -40°C to +60°C — covering Scandinavian winter operations through to high-ambient southern European summer conditions without performance degradation. For international haulage fleets operating across climatic extremes, that range matters. The LED maintains full output at temperatures where filament lamps and lesser LED units struggle.
Dual 12V–24V Operation — One Part for Your Entire Fleet
Internal voltage compatibility across the full 12V–24V range eliminates voltage mismatch risk across mixed fleets. One SKU. No separate 12V and 24V variants to manage. For UK operators, the DVSA MOT Inspection Manual for HGVs confirms position lamp function and condition as testable items — a failed or non-compliant marker lamp is a defect on inspection. Fit the Hella unit and the compliance box is ticked.
Buy 2PF 959 590-202 Position Light for Trucks Online
In stock and shipping today across the UK and EU. Genuine Hella 2PF 959 590-202 marker lamp — ECE approved, ADR certified, dual voltage, crystal clear lens. Order now and clear the fault before your next inspection, pre-departure check or ADR compliance review.
Installing the 2PF 959 590-202 Position Light for Trucks
Step-by-Step 2PF 959 590-202 Fitting Guide
⚠️ This unit requires installation by qualified personnel. The product specification mandates assembly and disassembly by a competent auto-electrician or workshop technician — particularly critical on ADR/GGVS-registered vehicles where lighting compliance is subject to formal certification.
- Isolate the vehicle’s electrical system fully before starting any work.
- Remove the failed position light unit from the mounting position — retaining screws or clips as appropriate to body type.
- Disconnect the wiring connector from the existing unit and clear it from the mount.
- Offer up the Hella 2PF 959 590-202 marker lamp to the mounting surface — confirm the fitting-mount base seats correctly against the body surface.
- Route the 500mm cable to the vehicle loom connection — confirm the run reaches without strain on the cable or connector.
- Connect to the vehicle loom — confirm polarity before seating, as LED circuits are polarity-sensitive.
- Secure the unit to the mounting surface with the retaining fixings.
- Restore vehicle power and confirm the 2PF 959 590-202 crystal clear position light illuminates correctly with the position circuit active.
- On ADR vehicles — record the replacement in the vehicle’s lighting compliance documentation.
FAQs —
Is the 2PF 959 590-202 approved for ADR/GGVS hazardous goods vehicles? Yes. This unit carries both ECE type approval and ADR/GGVS certification — making it the correct specification for trucks operating under dangerous goods transport regulations across the UK and EU.
Does the 2PF 959 590-202 work on both 12V and 24V systems? Yes. The unit operates across the full 12V–24V range without modification or additional components. One part number covers your entire mixed fleet.
Why does this unit require qualified personnel to fit? The product specification mandates installation by qualified personnel — particularly relevant on ADR-regulated vehicles where lighting compliance documentation must be maintained. A competent auto-electrician or workshop technician should carry out the installation.
What is the use number for the 2PF 959 590-202? The use number for this unit is E24 0054. This reference confirms the ECE approval designation applicable to this position lamp.
